Water damaged Worktop replacement

jobber   Geplaatst door Auran A jobbing
✔ Lengte in meters : 1m
✔ Werkblad moet bijgesneden worden

We had a burst water pipe , this has damaged a 1.5M part of worktop , this needs removal and replacement , I have a matching worktop full plank
Vóór :
Date 15/09/2021

Lieu BL7 0JQ

date 0-120 GBP

date Rechtstreekse betaling
job 613309
Huidige aanbiedingen
175 GBP
John P

 5 klusjes gedaan
 Geverifieerd telefoonnummer
 Geverifieerde identiteit
Hi Auran, this is a butt and scribe joint and involves a good deal of cutting, a cheaper alternative would be to use a metal strip between the 2 pieces this would cost approx £10 for the strip and £50 to fit worktops, alternatively you could ask the suppliers of the worktop if they offer a "butt and scribe" service, if they do then again the price for fitting would be £50, cheers John

Q&A Vragen/Antwoorden

Hi Auran, is this a straight run? Ie is there a sink or hob to be cut in or is it joined to another section of worktop? Cheers John
Datum van het bericht 11/09/2021 12:29
Openbaar bericht Openbaar bericht
It’s the corner straight run but needs a smaller piece to make L shaped . No hob or sink cut out
Datum van het bericht 11/09/2021 15:35
Openbaar bericht Openbaar bericht
I’ve attached a photo , hope you can see it ?
Datum van het bericht 11/09/2021 15:41
Openbaar bericht Openbaar bericht
Hi Auran, can't see photo, is there a metal strip between the 2 pieces that form the corner or are the 2 pieces butted together? Cheers John
Datum van het bericht 11/09/2021 17:01
Openbaar bericht Openbaar bericht
No metal strip just glued together .
Datum van het bericht 11/09/2021 22:02
Openbaar bericht Openbaar bericht
Om commentaar te geven op deze klus log in of inschrijven.
Een vraag?
pro  +32 28 080 359